British General Elections Essay Example | Topics and Well Written Essays - 750 words

British General Elections - Essay Example Yet Brynin and Newton suggest an interesting fact that people whose political ideals and attitudes are compatible with the newspaper they read are more likely to vote than people whose attitudes are considerably cross pressured or go against their own. The study points out that the effects of the newspaper in determining voter choices is significant though not too large and newspapers effects seem to be greater for closely fought elections as that in 1992 than in 1997. Newspaper effects are even high for Labour reinforced political support than for conservative reinforced. The study highlights the fact that newspapers do have a statistically significant effect in determining political behaviour of the voters although the influence of newspapers is more conspicuous during close election results rather than in landslide victories. The study also focuses on the fact that the Conservative press dominated daily circulation in Britain from 1945-1992 and this may have helped the party to wi n elections continually and remain in power. The role of the press in voter decision making process and in consequent determination of election results could be considered as significant especially for close elections and voter turnout is determined by the newspapers and the impact that the news reports has on the electorate. The fact that there has been a decline in electorate turnout in the present British elections has raised concerns and Rallings and Thrasher (2003) point out that poor voter turnout is a long feature in British politics. They discuss the recent reforms and electoral arrangements that have attempted to encourage higher voter participation by reducing costs of voting although the effects of these reforms may not be complete if the voters do not comprehend the value of their own voting contributions to the development of the community or the nation. Thus it is important for the electorate to perceive the importance of their vote in shaping the nation and its future and this may be the single most important factor in increasing voter turnout. Rallings and Thrasher point out that the electors who vote in general elections but not in local contests may be more affected by changes and commitment to local community needs and concerns would help to counter voter apathy. The election results an d outcomes regarding winning of elections would be important as a mobilising tool as when local elections seem to bring about changes within the local community, then possibly there will be less apathy for the elections and voter turnouts will increase. The turnout to the British general elections of 1997 was at 71% which caused concerns about the long term scenario of political participation in the country. Pattie and Johnston (2001) provide a political analysis of voter turnout and suggest that there was rapid decline in turnout during the 1950 through 1970 although there has been no long term decline in general election turnout between 1974 and 1997. According to the analysis, close

Immanuel Kant - Ethics Essay Example for Free

Immanuel Kant Ethics Essay Immanuel Kant was born in Konigsberg, East Prussia in 1724. He attended the Collegium Fridiricianum at eight years old where he was taught classicism. Then he went to the University of Konigsberg where he spent his career focusing on philosophy, mathematics, and physics. When his is father past away, Kant left the university and earned his living as a private tutor. In 1755 he returned to the University to receive his doctorate in 1756. Immanuel Kant remained at the University teaching for 15 years. He received his tenure at the University in 1770, where he stayed for the next 27 years. In 1792 he was barred from teaching or writing on religious subjects do to his unorthodox approach in his teaching by King Fredrick William II. He returned to teaching after the king had passed away five years later. In his retirement he published a summary of his views on religion. Immanuel Kant passed away in 1804. Immanuel Kant was widely known for his categorical imperative theory. Categorical imperative is how one determines one’s duty, what principles are proper, and which are not. Doing one’s duty for the sake of duty itself is better than simply acting in agreement with one’s duty. Telling the truth in order to benefit yourself is acting in accordance with duty and not acting for the sake of duty. The categorical imperative states, â€Å"Act only on that maxim whereby thou canst at the same time will it should become universal law(Keele, 2008). † Maxim in this sentence is the moral part of your action. Categorical imperative tells us it is immoral to make an exception of our self. Just like my mother would say treat and act as you would want others to treat and act towards you. In the news I view an article about â€Å"School knife attack poses ethical dilemma for daily. † In this article they talk about the Worcester New identifying a schoolboy as a suspect. The news published the boy’s name and picture on Facebook putting the boy’s life at risk. After the boy was found the news took down the boy’s picture at once. Everyone was perplexed by this situation asking why they put picture up and then took it down. According to the Worcester News, the situation change, where they were trying to find the boy to stop him from hurting himself or others and then to protecting the child. Would the newspapers actions have been ethical according to Immanuel Kant’s Categorical Imperative? First let’s take a look at the reasons why they did it. The newspaper stated they put his picture up to protect him and other, then took down to protect him. I believe they were acting in the best of society myself by putting the information up. According to Immanuel Kant’s theory they were acting in accordance with their duty. They had a duty to let the public know what was going on to protect other students and teachers If they didn’t act with such speed would the boy have been found so soon? I think not! This boy could have went on a killing spree and if the Worcester News didn’t report it they would not have been acting in the best of society and would not have been doing their duty. But then to take down the information I feel is unethical. They don’t take down any information when it comes to any other person involved in a crime. Immanuel Kant stated that it is immoral to make an exception of yourself. The Worcester News should hold to the same standards as any other crime they report. I understand that they are trying to protect the boy, but if you are going to report any other crime and not take it down this should happen in the same way. In conclusion, based on my research I feel that Immanuel Kant’s Categorical Imperative theory is important to our society today. It holds everyone to the same standards! He has help to maintain a set of standards for our society that requires everyone to be treated the same. The study of ethics is important in today’s business and government world because it sets standard for all to abide. From John Locke’s right theory to Kohlberg’s moral development stages. They all 1 / 2 set standards in which business need to stay within. If there were no standards there would be more scandals in the news than there is. References Britannica. (2014). Immanuel Kant. Retrieved from http://www. philosophypages. com/ph/kant. htm. Keele, Lisa. (2008, The Categorical Imperative of Immanuel Kant. Retrieved from https://www. suite. io/lisa-keele/ypd2fk. Linfold, Paul. (2014, September 28). School Knife Attack Poses Ethical Dilemma For Daily. Retrieved from http://www. holdthefrontpage. co. uk/2014/news/school-knife-attack-poses-ethical- dilemma-for-daily/ POWERED BY TCPDF (WWW. TCPDF. ORG).

Impact of Abusive Language in Hollywood Movies on Youth

Impact of Abusive Language in Hollywood Movies on Youth Research Question: Q. Does the abusive language in Hollywood movies change the speech/language behavior in the youth of Lahore? Rationale: The aim of this research is to examine the impact of abusive language used in Hollywood movies on youth of Lahore. This research is new to us because the trend of watching English movies among the youngsters has increased. And due to this they are effecting with the offensive language that is used in Hollywood movies. I selected the Hollywood movies because the issue pointed in this which seems to be quite little but leaving a very bad impact on our society specially the youth. Abusive language was never acceptable in any society but offensive language which was otherwise considered broadly acceptable was considered unacceptable by some when used too frequently. Dockterman (2014) notes that, â€Å"It’s not surprising thatâ€Å"the wolf of wall street† set a new recordsince the movie is all about excess: excessive hookers, excessive drug use and, of course, excessive swearing.† Whether children were likely to be watching or listening and, if so, what impact the language might have on them was is a key consideration. It is very interesting topic as it is attention seeking for the people. This research intends to find out that how much people are adopting such prohibited words and languages. I took this topic because I want to bring it to the frontline. I personally feel this topic interesting because I found lots of examples related to this in Pakistani society. People are considering it a part of high class and our youth is using such language to throw such impact that they belongs to high class society. And it becomes a part of being stylish and swag. Mail online (2014) notes that, â€Å"Television viewers are being deluged with foul language as swearwords and blasphemy become commonplace in Hollywood films. Media monitors counted the f-word 1,429 times in 60 movies shown on terrestrial TV in the first six months of this year. There were 827 uses of s*** as well as 221 exclamations of Jesus or Christ, which also offend many.† Hypothesis: H1: Abusive language in Hollywood movies changes the speech behavior in the youth of Lahore. Ho.: Abusive language in Hollywood movies does not change the speech behavior in the youth of Lahore. Literature Review: My research area includes the level of abusive behavior among the youth of Lahore. I picked some articles and existing work done on this topic which will help me to land at considered decisions about my research and to examine that what I have to find out of these existing literatures. First literature includes the notions of gendered language in action films which indicates that whether men use more swear words or women. Second literature includes that how Hollywood films promote the American culture among the audience. Third literature notes that the Hollywood movies are responsible for the behavioral changes that occur in the other cultures. Forth literature investigated that the offensive language on prime-time show and cable programs found that 9 out of 10 projects contained no less than one episode of profanity. These literatures are described in detail below. Marcus Midefelt (2013) notes that, â€Å"A few specialists said media depicts the truth and different says it reshapes the view of reality. This study examines this relationship by measuring the recurrence of three folk linguistic thoughts of gendered language in action movies. They chose ideas are Ladies talk more than men, Men swear more than ladies and Ladies utilize more label and pitch questions than men. The study demonstrates that male heroes produce the most astounding number of every examined variables. Then again, considering that the study additionally shows that male heroes talk more than their female partners; the higher creation of every examined variable may be a consequence of this. The technique used to accomplish this point is the quantitative system Content Analysis. The most unmistakable after effect of this study is that men create the most astounding number of each variable contemplated. In any case, the generation of contemplated variables in the middle of mal e and female heroes contrasts by generally the same rate for each variable. The generation of any mulled over variable by male heroes fluctuates between 62-66% of the aggregate events of the variable, including the quantity of lines articulated. This implies that the high number of studied variables expressed by male heroes is prone to be an aftereffect of male heroes articulating a greater number of lines than female heroes. (p.2) Wanwarang Maisuwong (2012) notes that, The Americans movies are seen in the America, as well as they are seen by the huge gathering of people the world over. Moreover, the American film firms overwhelm the majority of market share on the planet film industry. It appears that utilizing movies is the best mean for the America to pick up acknowledgment and kinship. Movies depict a smooth narrating and draw in the individuals to continue viewing from the earliest starting point until the end. In this paper, Researcher has chosen 30 Hollywood films from year 2001-2010, each of them won universal recompenses. He investigated the films on what are discriminating social qualities and political messages in every chose film that America tries to impart towards the world group of onlookers. He mostly centered around seven alternate points of view of society which appeared to be the most clear culture showed up in Hollywood motion pictures. In this study specialist has investigated the Hollywood film, Pearl Habor is a true to life talk motion picture where it contains both war and sentiment stories. Two young men grew up together, turned out to be great companions, and later experienced passionate feelings for the same lady. The film communicates the difficult of adoration for three individuals and the endure of American individuals amid the atrocity. He examined the accompanying focuses quickly Freedom of Expression, Nationalism, sexuality, Language, way of life and worth. At last he reasoned that Expected Cultural Effects of Hollywood Movies to the Audience is Language Effect, subsequent to presenting to the motion pictures, the individuals may swing to speak American intonation, they might likewise receive those American slangs and languages to their day by day life.† (P.2-4) Birkel, J., Lee, S. Oirya, J. (n.d) explains in his study, â€Å"That study was built on the theory of Americanization that postulates that American movies have a profound impact on certain aspects other cultures. It focused on examining the international opinions of people who watch Hollywood movies, as well as the extent to which and ways in which they felt these movies affected their culture and them as individuals. It relied on convenience sampling from international college students, studying in the United States. The main implications of this study, as it are explained in the results that Hollywood movies are responsible for the behavioral changes that occur in the other cultures. Hollywood’s ability to Influence sexual behavior creates an issue that affects the world by influencing the rise and fall of sexual behaviors. Along with sexual and violent media, some groups and individuals within the United States are concerned with the frequency in which profanity is used i n Hollywood movies. This issue can be examined from a broader point of view as well, assuming that if a culture’s language is affected by Americanization, then trends in America’s use of profanity will naturally be part of that. So the people in other cultures may be correct in assuming that America’s influence results in the decline of their culture.† (p2-4) Kaye, B. K. Sapolsky, B. S. (2009) notes that, â€Å"This examination of offensive language on prime-time show and cable programs found that 9 out of 10 projects contained no less than one episode of profanity, and viewers were presented to 12.58 cuss words every hour in 2005. Viewers of show projects were presented to somewhat under 10 questionable words every hour contrasted with 15 words-every hour on link programs.† (P.1-3) Offensive language occasionally has been slipped into programs subsequent to the beginning of TV, however beginning in about the late 1980s, coarse language. The primary focus of this research is to extend earlier published work by Kaye and Sapolsky (2001, 2004) by examining whether cable-delivered programs contain more instances of profanity than broadcast shows. Overall, 9 out of 10 programs on both broadcast and cable television contained at least one indecent word or 330 phrase. Risquà © language was spoken nearly once every 5 minutes. Just over one- half of objectionable words were of the mild type (i.e., damn, hell). These findings are similar to previous studies that show the proportion of profanity represented by mild-other words has steadily decreased; 80.7% in 1990, 75.0% in 1994, 68.6% in 1997, 60.6% in 2001 (Kaye Sapolsky, 2004) indicating a gradual coarsening of 335 language spoken in prime-time. Overall, this study contributes to the issue of verbal indecency on television, especially in its comparison of broadcast to cable programs. While offended viewers and lawmakers are insisting that the FCC more strongly penalize broadcast stations for airing programs that contain verbal indecency, they, along with broadcasters, are 415 also wagging their fingers at cable programs, which they claim are even more vulgar. My research area would bring a new research in such a way that I mainly focused on language as it is a part of our culture and what is the impact of offensive language on the youth of Lahore. I am going to add to the existing literature in this way that my research is directed towards on a very essential part of our culture which is language and its impact on the youth of Lahore specifically. This research would help you to find out that what are the factors attracting students towards use of abusive language and to understand how viewers and listeners decide what is considered generally acceptable/unacceptable in terms of possibly abusive language. Research Methodology: The researcher has laid a research design to study the impact of abusive language on youth of Lahore, to find out the answers to the research questions and to investigate the formulated hypothesis. Research Design: Research design refers to the different methods through which the data is collected. For the study at hand the researcher has employed descriptive research that includes surveys and fact-finding enquiries of different sorts. The researcher applied one method to carry out the research. I will conduct surveys in order to find out some results regarding my research. Tools of Data Collection: The researcher used one method to collect the information and analyze the Impact of abusive language on youth of Lahore. I will use the method of questionnaires to conduct my research and asks people to fill these questions which include young people. Survey In the current study the researcher used the quantitative method i.e. survey for data collection. Questionnaires were used as the tool of survey. Quantitative method: I will use quantitative method which includes questionnaires in order to conduct my research. I will use Questionnaire method because it is an easy method to collect data from a large and massive audience. I can easily collect my data by asking young people to fill out the questionnaire paper. Population The population of the survey was selected by keeping the target audience in mind. And the target audience was youth in the universities of Lahore. Young people from universities are selected because they watch more Hollywood movies. Movies are more popular among the youth. Educated people especially young educated people are more likely watch Hollywood movies in their leisure time or for entertainment. . The university students are mature and make their own decisions so the effect measured on them will be realistically accurate. So the researcher chooses university students to determine the impact of abusive language used in Hollywood movies. Sampling The Purposive sampling is a form of probability sampling which the researcher used to collect the data from different universities. Variables Dependent: Lahore Youth’s exposure to Hollywood films. Independent: Level of abusive language. Ethics: My research will also include the ethics that I will ask permission from my population before taking information from them. My questionnaire has a section of ethics that will u allow me to take your few seconds in order to fill this questionnaire. As this research needs some personal information and language is also a part of personal thing that what is there language and what kind of swear words they use. So ethics are an important part of my research because it is matter of people’s personal behavior i.e. speech behavior. Bibliography: Birkel, J., Lee, S. Oirya, J. (n.d.). Hollywood Americanized Sex, Violence, Language and Body Images: A Study of Cultural Perceptions Regarding the Influence of American Movies on International Students. Retrieved on April 12, 2014 from www.lekrib.com/HollywoodHegemony.pdf Dockterman, E. (2014). The Wolf of Wall Streert Breaks F Bomb. Retrieved on April 6 , 2014, from Time.com: http://entertainment.time.com Kaye, B. K. Sapolsky, B. S. (2009). Taboo or Not Taboo? That is the Question: Offensive Language on Prime-Time Broadcast and Cable Programming. Journal of Broadcasting and Electronic Media, 53(1)P1-3. Retrieved on April 23, 2014 from http://www.cci.utk.edu Midefelt, M. (2013). Sailors and Tentative Talk-a-lots: A Study of Folk Linguistic Notions of Gendered Language in Action Films. Unpublished P.H.D Thesis, University of Gothenburg. Retrieved on April 8, 2014 from https://gupea.ub.gu.se Mail Online (2014), Too much bad Language on TV.http://www.dailymail.co.uk/tvshowbiz/article-188713/Too-bad-language-TV.html#ixzz37JemGBN0 Maisuwong, W. (2012). The Promotion of American Culture through Hollywood Movies to the World Audience: A Threat to National Identity and Sovereignty. International Journal of Engineering Research Technology, 1(4)P2-4. Retrieved on April 12, 2014 from www.ijert.org

Charles Lindbergh :: essays research papers

Charles Lindbergh was a man of many accomplishments. In his time, everybody loved him. Charles was well known all over the world. He was a hero, he represented all that could be accomplished in the future. He was a figure for doing what nobody else thought could be done. Lindbergh was one of those people that everyone else wanted to be. Charles Augustus Lindbergh was born in Detroit on February 4, 1902, to Charles Lindbergh, Sr., and Evangeline Land Lodge. Yet, he grew up in a small town in Nebraska. Lindbergh was a whiz with mechanics. By age twelve, he was in charge of driving and fixing the car. In high school, he assembled a tractor from a mail order kit. When he was eighteen he entered the University of Wisconsin to study engineering. He found he was more interested in flying, so after two years of college, he dropped out and became a barnstormer, which was a pilot who performed daredevil stunts at fairs, and airshows. Lindbergh was a favorite among the crowds. People would travel from all different places, even Europe, to come see his daredevil tricks. In 1924 Lindbergh enlisted in the U.S. Army so he could be trained to be a pilot. During this time he was given the nickname “Lucky Lindy'; because he would attempt daredevil stunts with his airplane, and always seem to evade punishment from upper officers. In 1925 he graduated as the top pilot in his class. He soon began working as a mail deliverer between St. Louis and Chicago. Lindbergh soon heard of an offer given in 1919 by a New York hotel owner named Raymond Orteig. The offer was this: the first aviator to fly nonstop from New York to Paris would receive 25,000 dollars. Nobody had succeeded by 1927, and Lindbergh decided he could do it if he had a suitable plane. Remember, in 1919 this was a very scary thing to do! There was no radio on your plane, so if it went down, you could not call for help, and nobody would know where you were. Also, there was no coast guard, no search and rescue teams, so if you crashed, you were dead. He arranged for nine St. Louis businessmen to help him finance his plane. A company in San Diego called Ryan Aeronautical Company was chosen to construct the plane, which Lindbergh helped design. The plane was named "The Spirit of St. Louis". A transcontinental record was immediately set in a test run when Lindbergh flew from San Diego to New York City in

Marine Fishes

Marine aquariums and saltwater fish†¦ capturing the imagination and inspiring enthusiasts for nearly 2 centuries! The world’s oceans are inhabited with over 14, 000 species of saltwater fish. A fascinating realm of sea creatures that are natural wonders of color, form, and display. With such an astounding diversity, learning about marine fish and keeping saltwater aquariums is an exciting adventure. Our list of saltwater fish covers a wide array of species from marine aquarium fish to exotic species. Each fish guide offers salt water fish information starting with where they are found and their habitat, followed with fish care, behaviors, and compatibility. Fish pictures are provided with each guide to help choose a pet and aid as a fish identification guide. Log In Marine Aquariums – Saltwater Fish | |Saltwater Fish Guides – Fish Care and Information – Pictures of Fish | |Anemone Fish | | | |Many anemone fish enjoy a simbiotic relationship with anemones | | | |[pic] | |Anemonefish – Damsels – Damsels are very colorful, but are also very hardy and adapt easily to captivity. | |[pic] | |Clownfish – Clownfish get their name because of their clown like markings and an adorable ‘waddle-like' swimming motion, they | |are truly the clowns of sea! | | |[pic] | |[pic] | | | | | |[pic] | |Angelfish – Saltwater angelfish are truly an inspiration for many aquarists. Their majestic beauty is rivaled by few other | |types of fish. | |[pic] | |Blenny Types – Blennies are long, blunt headed fish. The male blennies are usually larger and more colorful than the females. |Blennies like to perch in the rocks and will enjoy an aquarium with plenty of rockwork or live rock. | | | |[pic] | |[pic] | | | |[pic] | |Butterflyfish – Like angelfish, butterflyfish can be incredibly colorful and beautiful. Unfortunately, they are generally | |harder to keep in an aquarium because of their specialized diets. |[pic] | |Gobies and Dartfish – Gobies live in holes either found or dug from the sand which serve as a place to bolt into when danger is| |near, while the Dartfish or Dart Gobies swim above their protective caves. | | | |[pic] | |[pic] | | | |[pic] | |Hawkfishes – â€Å"The name comes from their hawklike hunting behaviour. | |[pic] | |Lionfish – The Last Thing Many Fish Will Ever See †¦ | | | |[pic] | |[pic] | | | |[pic] | |Mandarinfish and Dragonets – Mandarinfish and Dragonets are mostly bottom dwellers. They often like to bury themselves in the | |sand or flit from rock to rock in search of the small animals they like to feed upon. |[pic] | |Marine Eels – â€Å"The romans valued morays very highly, docorating them with jewels† | | | |[pic] | |[pic] | | | |[pic] | |Miscellaneous Saltwater Fish – Saltwater fish that are not represented by a large number of species. Many of these marine fish | |make wonderful additons to the marine or reef aquarium. | |[pic] | |Puffers – Boxfish – Porcupinefish – Puffers, Boxfish, and Porcupinefish are considered hardy in the sense that they will almost| |always adapt to aquarium food if fed proper foods. These fish love to eat will often look forward to seeing the person that | |feeds them. | | |[pic] | |[pic] | | | |[pic] | |Sea Basses and Groupers – â€Å"When the Betta hu nts it approaches its prey sideways †¦ † | |[pic] | |Sharks and Rays – Sharks and Rays can be incredible additions to aquariums that are large enough to suit the particular | |species. Unfortunately most of them are too large for anything but a public aquarium. | | | |[pic] | |[pic] | | | |[pic] | |Surgeonfish – The Acanthuridae family contains the fish that are known as Surgeonfish, Tangs, Unicornfish, and doctorfish. The | |name â€Å"surgeonfish† comes from the erectable razor sharp spines at the base of their bodies just in front of the tail fin. |[pic] | |Triggerfish – Members of this family have acquired their common name ‘triggerfish' from the characteristic locking and | |unlocking of their first dorsal fin. | | | |[pic] | |[pic] | | | |[pic] | |Wrasses – Wrasses come in a wide assortment of colors, shapes and sizes. They are very beautiful and a fun addition to marine | |aquariums. | | | | |

Accounting Research Paper Ultimate Writing Guide

Accounting Research Paper Ultimate Writing Guide In contemporary highly technical and complex business environment, today’s and tomorrow’s accountants and accounting leaders have to be proficient in all communication skills. That’s why teaching the writing skills is integrated into accounting curriculum. Students are assigned to write different formal essays, term papers, research papers, reports. In this way, they learn to analyze and synthesize while thinking about accounting topics in the process of organizing and structuring their thoughts to produce a logical and sequential flow of ideas. Students who take senior-level accounting courses usually have to write complex research papers in some areas of accounting theory. When writing traditional research papers in accounting, students have to prepare a well-documented manuscript on a specific topic or thesis. These assignments are rather challenging and require doing an independent research that includes a lot of stages such as identifying a problem, gathering data, reflection, implementing changes, monitoring, etc. Such assignments can also include applying the theories to some real-world situations. In this article, you will find a complete accounting research paper writing guide that will help you to cope with any difficulties that you may encounter at every stage of the writing process. What Is an Accounting Research Paper? An accounting research paper is a complicated assignment that cannot be treated as just the sum of your sources or a review of the existing literature on your topic. In your research paper, you have to analyze the perspective or argue your point. No matter what type of research paper you have to write, you need to present your own thinking that should be backed by other’s ideas and relevant information from credible sources. There are two types of research papers: analytical and argumentative. In an analytical research paper, you have to inform your readers about different opinions on your topic. In an argumentative research paper, you should take your side on an issue and persuade your readers to support your position. Research papers are very formal in style and require that you should take a more scientific approach to the material. They commonly suggest having a hypothesis on a certain topic and your task is to prove or reject this hypothesis with the help of outside sources. All research papers have to achieve specific goals: They must meet the needs of the assignment. When working on your research paper, you should strictly follow specific requirements provided by your instructor that detail topics, documentation methods, and use of sources. Research papers must have a clear focus. For that matter, you should narrow your topic to stay on the track. Research papers have a clear thesis statement or statement of purpose. You should focus on your own opinions and interpretations and not on the views of the others. Research papers give comments on the quality and quantity of sources. You should distinguish between reliable and biased sources, facts and opinions, authoritative and questionable statistics. Steps in the Writing Process There is not a single template for writing a research paper so the process is determined by practice, organization, and experience and begins with your properly understanding your assignment or identifying an interesting topic. Accounting research papers may vary in page lengths and guidelines. To become an experienced writer and researcher, you should pay attention to the genre of your research paper, topic, and audience. Besides, you should work on improving your research skills, and become experienced in outlining, drafting, and revising. The most common stages of writing a research paper in accounting are: choosing and narrowing a researchable topic; reading sources and documenting information; writing an outline; writing the first draft; revising and editing; proofreading the final draft. Choosing a Topic Commonly, the instructor provides a list of research paper topics from which you may choose so there is no stress of having to decide upon a topic of your own. But very often, your instructor may simply hand out an assignment sheet that covers general requirements for the research paper, leaving the choice of topics to the students. Of course, research paper topics should be relevant to some aspect of the course so making the right choice can be rather challenging for inexperienced researchers. That’s why you should start thinking about the topic for your accounting research paper early and plan your work beforehand. One of the most successful techniques is brainstorming – you should write down all the ideas that might have come to your mind during the day. This technique is especially helpful when you have some ideas but need to narrow your topic. But you should keep in mind that the initial topic that you come up with may be changed in the process of doing the research. Have a look at some accounting research topics ideas that may be useful for first-time researchers. Accounting Research Paper Topics Accounting Cycle Process of a Certain Company Accounting for Stock Options Accounting for Income Taxes Accounting Regulation in the USA Current and Non-current Assets Management Accounting Techniques Financial Statement Analysis Techniques Tax Formula and Its Components Tax System in the USA Accounting for the Environment Strategies for Conducting Research Every research paper poses unique challenges. Some research papers may require extensive library research, while other papers can be based on surveys, field research, original experiments, and interviews. Although different topics may require different approaches, there are several general strategies that you can use to work more productively. Review the assignment and make sure you fully understand what you are required to do; Conduct a preliminary research on your topic to learn basic terms and details and develop an overview of the existing research; Narrow your topic and find out what range of evidence is available; Create questions to choose sources and develop a working thesis statement; Make a timeline that allows to finish your research on a fixed date; Record the information that you need to cite sources; Sketch an outline as you collect sources to understand where they might appear in your research paper; Prioritize your sources and choose the most valuable; Refine and revise your thesis statement or research question if needed. Organizing a Research Paper on Accounting The purpose of organizing a research paper is to give your readers an opportunity to read your paper selectively, depending on what type of information they are looking for. Your paper should have a clear structure and include several parts with headings and subheadings. Before you start writing the paper parts, you should make your thesis statement or statement of purpose (or write your hypothesis) that will help you stay focused and organize your material in a logical manner. You should plan your writing and make an outline that will help you organize information and ensure that the structure of your paper is complete and logical. Structure of an Accounting Research Paper While research papers in different academic disciplines may vary in style and format, most research papers have a similar structure and are usually divided into parts that follow the same logical flow. Your accounting research paper should include the following parts. The title should be concise and specific and it should show what problem is discussed in a paper, using specific keywords. The abstract helps readers to quickly get an idea about the content of a research paper. It should be very brief – about 200 words and it might be rather challenging to write. You’d better write the abstract after you have finished your research paper because it is actually a summary of the entire research paper. Your abstract should provide a quick synopsis of the content and introduce the problem to be investigated, objectives of the study, methods of research, and statements about the results and findings. The introduction should introduce the broad overall topic and give basic background information. Then, you should narrow down to the specific research question, explain the key terms and outline what your research paper will cover. The introduction provides the focus and the purpose for the rest of the paper. The literature review describes existing important research on the topic and relates it specifically to the research problem that is addressed in the paper. In this part of the research paper, you should examine the major accounting theories related to your topic. You should review all relevant findings from credible sources, for example, journal articles and academic books. In the methods section, you should describe the context of the study, provide specific details about the study design, and outline methodology that you used to complete the study, including analysis methods. In the results/findings section, you should present the results of the analysis in a clear and logical sequence. You should report the key findings related to the research question and provide enough details so that your readers would be able to replicate your study. You can include charts, table, graphs, and pictures. If you have a lot of information that supports your analysis but which is not essential for the explanation of your findings, you should place it in the appendix. The discussion/analysis section should present interpretation of the main findings of the study and the implications of the results. You should also mention the limitations of your study. In this section, you can discuss how your findings relate to the previous research that you have mentioned in the literature review. In the conclusion, you have to sum up your findings and offer perspectives for future research. The references/bibliography section should present an alphabetical list of all sources that you have used for obtaining information. All your sources should be cited according to the requirements of the citation style specified by your instructor. The format of the references is the same as the format and style that you use in your research paper. The format of an accounting research paper outlined above is standard but it is always better to ask your instructor about his/her expectations. Writing a Draft When writing your first draft, you shouldn’t be too much concerned about the formal issues. There is no need to worry about your grammar or spelling because this draft will be revised later. You should focus on the content and write all your ideas, following your outline. Besides, you have to expand your ideas with the data from your notes. You should write with a purpose and consider your thesis statement or research question to be a compass that helps you stay on the track and follow the direction. Revising, Editing, and Proofreading When you have completed drafting your accounting research paper, you should read it and revise it. You’d better take a break for a couple of days. It will give you enough time to think about the topic of your research and you will reread your piece of writing with fresh eyes. You need to pay particular attention to the general organization of your paper and the content and you are sure to find lots of different ways how to improve your work. Revising and editing your accounting research paper may require a lot of readings and each of them can have its own specific goal. You can also ask someone else, for example, your family member, a friend or a classmate to look through your accounting research paper and help you find any mistakes. You can also hire a copy editor to read your paper. The final stage of the accounting research paper writing process is proofreading your final draft for technical errors. You should reread your final draft carefully in order to find and fix any spelling, punctuation or grammar mistakes or typos that you might have overlooked in the previous revisions. Final Remark from Our Writing Experts: Revising and editing are different processes and require different approaches and actions. When revising, you can: make changes to the various drafts of your project evaluate your word choice and improve it remove paragraphs or even pages of your text think again about your project and rewrite it completely When editing, you should take care of the general appearance of your text. You should: evaluate the logical flow between major ideas and paragraphs analyze the consistency of tone and voice throughout your research paper correct minor error in typography and mechanics. Make sure you don’t mix the notions and do editing, then revising.

Desire & Death in Death in Venice essays

Desire & Death in Death in Venice essays Death and desire are two of the most extreme feelings that can be felt by humans. Death and desire lie at the two opposite sides of emotions. Death, being the end of life, a feeling of fear and the final step, of going towards meeting the lord again. Whereas, desire is one of the most sensual feelings, where the person believes everything in the world revolves around the person they desire, the person will be ready to make all sacrifices just to be next to his love. Conflicts arise when death and desire are together and a decision has to be made. Human beings are immortal; they all have to die, but the feeling of opting for death instead of life so as to be just close to the love can be enduing and the ultimate sacrifice for the Many theories and philosophers have given various theories to explain the phenomenon and the feelings of "Desire". Judith Butler has stated one of these theories in her book, "Gender Troubles". Her essay related to genders and feminism, she believes that there are no two different sexes, instead there are two genders, and the differences lay in their productivity other then that, both the sexes are the same. She believes characterizing one Judith Butler is a Professor of Comparative Literature and is well known as a theorist of power, gender, sexuality and identity. In her most influential book "Gender Trouble" (1990), Butler argued that feminism had made a mistake by trying to declare that 'women' were a group with common characteristics and interests. According to, Butler that approach, performed an ignorant directive and redirection of gender relations i.e. reinforcing a twofold view of gender relations in which human beings are divided into two clear-cut groups, women and men. Instead of opening up possibilities for a person to structure and decide their own individ...

SAT Writing - PrepScholar 2016 Students Encyclopedia

SAT Writing - PrepScholar 2016 Students' Encyclopedia SAT / ACT Prep Online Guides and Tips The Writing section of the SAT consists of multiple choice questions and a 25 minute essay. The Writing section was added to the SAT in 2005, changing the maximum composite score from 1600 to 2400. It was based on, though not directly comparable to, the old SAT Subject Test in Writing. Note: this article is a series in the PrepScholar2016 Students' Encyclopedia, a free students' and parents' SAT / ACT guide that provides encyclopedic knowledge. Read all the articles here! To prepare for the Writing section, students benefit fromfocusing ontwo main areas: their understanding of grammar rules and their ability to present and support their point of view in a 5-paragraph essay. In terms of grammar, students mustidentify specific rules, like subject-verb agreement and dangling modifiers, and fix sentences that containerrors. Students willalsobe called upon toexhibit correct grammar and varied sentence structure in their essays, as well as to provide thoughtful examples to supporta thesis. The Writing section, like the Mathematics and Critical Reading sections, is scored on a scale of 200 to 800. The essay contributes about 30% to the total Writing score, while the multiple choice counts for approximately 70%. In addition to their scaled Writing score, students receive a separate subscore for the essay between 2 and 12. Two readers grade the essay on a scale from 1 to 6. These scores are then added together. If there is significant disagreement on an essay grade, then a third reader is called in to give his/her opinion. The average reader spends less than 3 minutes gradingeach essay, so structure and clarity are key to communicating a point of view and giving a strong impression to readers. An essay score of 0 is possible if the space is left blank or if the essay is illegible, completely off topic, or written witha prohibited instrument (ie, not a Number 2 pencil). Highly scoring SAT essays typically demonstrate a 5-paragraph structure, with an introduction, three supporting paragraphs, and a conclusion. The 25 minute essay is always the first section on the SAT. The essay section begins with a short blurb or quote, followed by a question asking for the student's point of view. The following essay prompt was given on the June 2015 administration of the SAT. Sample SAT Essay Prompt While the prompts differ, every essay assignment asks students to develop their point of view and to support it with reasoning and examples from various sources. As in the above example, the prompts are broad and often philosophical or related to a social issue. According to College Board, the essay is graded on several components. The first is the development of a point of view with strong supporting evidence. Graders look for organization, focus, and a logical and smooth flow of ideas. The essay is also graded on the skillful use of language, varied vocabulary and sentence structure, grammar, usage, and mechanics. An essay with a score of 12 will excel in all of these areas, while those that receive lower scores may have weaker development and organization, along with errors in grammar and usage. Despite College Board's claims to the contrary, several SAT critics and tutors have stated that longer essays often automatically garner higher scores. Many of these criticsalso recommend the insertion ofhigh level vocabulary words, like "provincial," "myriad," and "plethora" into essays to increase scores into the 10+ points range. Lee Perelman, former director of writing at MIT, assertedthat longer essays almost always score higher. He also suggested that students "pick a side," rather than argue a moderate opinion, follow a predictable 5 paragraph structure, and not concern themselves with accuracy in order to gain a strong essay score. In 2010, then 14 year old Milo Beckman examined115 SAT essays and concluded that longer essays almost always achieve the strongest scores. In addition to the essay, the Writing section consists of 49 multiple choice questions, divided into one 25 minute section and one 10 minute section for a total of 55 minutes.Both of these are entirely multiple choice, and the 10 minute section always comes at the end of the test. Students may encounter an additional 25 minute Writing section when they take the SAT. If this is the case, then one of the 25 minute sections is the experimental, or variable, section and will remain unscored. Since there is no way of knowing exactly which section is experimental, students benefit from assumingall SAT sections count toward their scores. These questions take three forms: identifying sentence errors, sentence improvement, and paragraph improvement.Writing questions mainly draw on a student's understanding of grammar, sentence structure, and organization within a paragraph or passage. There are 18 identifying sentence error questions on SAT Writing. All of thesesentences are independent of one another. They will have four words or phrases within them underlined, comprising answer choices A, B, C, and D. Answer choice E will read, "No error." Students choose the answer choice that corresponds to an error in grammar, usage, or mechanics or selects "E" if the sentence is correct as is. Sample SAT Question The 25 improving sentences questions test similar skills of grammar and usage, but they take a different form.In each of these questions, answer choices B, C, D, and E present an altered version of an underlined portion of the sentence. Answer choice Amaintains the underlined portion as it is and is the correct answer choice if the sentence containsno error. Sample SAT Question The 6 improving paragraph questions have a similar format, but they refer to underlined portions of an entire paragraph or short passage. In addition to errors within sentences, improving paragraph questions may ask about the placement or order of sentences, along with the organization and sequence of ideas. According to College Board, the Writing multiple choice questionsrequire students to demonstrate the following skills: To communicate ideas clearly and effectively To improve a piece of writing through revision and editing To recognize and identify sentence-level errors To understand grammatical elements and structures and how they relate to each other in a sentence To recognize correctly formed grammaticalstructures To clearly express ideas through sentence-combining and use of transitional words and phrases To improve coherence of ideas within and among paragraphs Most of these skills overlap with the stated expectations for the essay. Students also benefit from having the ability to recognize and revise rules of English grammar. The following include what SAT experts agree are themost commonly tested grammar rules on the SAT Writing: Subject-verb agreement Subject-pronoun agreement Parallel sentence structure Subject/object Proper verb tense Comparative/superlative Number agreement Dangling modifiers Idioms While the Writing section has been a part of the SAT for almost ten years, some colleges do not consider it with the sameweight as they do the Mathematics and Critical Reading sections. Students may research the standardized testing scores of their institutions of interest in order to learn whether it is a significant, or even required, factor in their college applications. Redesign Alert The new SAT starting in Marchof 2016 relocates the essay to the end of the test and makes it optional. The essay will be 50 minutes and will ask students to analyze a given passage. Furthermore, the new SAT will no longer have single sentence questions, instead testing skills of grammar, usage, and mechanics within the context of longer passages. Finally, the new SAT will return to a scoring system out of 1600, combining Critical Reading and Writing scores together on a scale from200 to 800. Read more from the SAT Encyclopedia! Further Reading The 12 Hardest SAT Writing Questions Ever How to Write an SAT Essay, Step by Step 6 SAT Essay Examples to Answer Every Prompt

Midterm exam Essay Example | Topics and Well Written Essays - 2000 words

Midterm exam - Essay Example Occasionally, culture of fake is always seen to supersede high culture. One such example is the popularity and usage of visual arts. Mass audience- it refers to a huge number of audiences congregating at the same place or listening to the same information at the same time. In such cases, the society is usually paying attention to one thing being aired or performed at the same time. Example is the use of mass media to passing information to a specific niche or political rallies in the society. Critics in the society have challenged this classification. Some have dismissed the effectiveness of popular culture in the development of the educated people in the society. On the other hand, some critics are proposing to merge the categories to portray one modern society. In addition, the feminists are also raising questions concerning the opportunities of women for creativity and how these have been able to change historically, and how the creativity of women have been put to evaluation, how women have been silenced and how men have been able to made meaning of life for women with the activities and myths. Despite this, the contemporary feminists have been able to take a diversified approach to dealing with these forms of culture (Charles, pg. 65). Assumption one- in this assumption, it is believed that women have a certain relationship to popular culture that is quite different from what men have towards popular culture. It has been pointed out that women have been playing key roles as consumers of particular products of popular culture, and they are, therefore, a core subject of the popular culture for both men and women. In addition, it is believed that in some cases and periods, women have been very important in creating and producing popular culture. Assumption two- to comprehend the functioning of the popular culture to both the patriarchal

Current Events in Public Health Leadership and the Fiedler Contingency Assignment

Current Events in Public Health Leadership and the Fiedler Contingency Theory - Assignment Example gs forth to two factors in leadership referred to as leadership style and situational favorableness as outlined in fielder contingency model (Ornstein, & Lunenburg, 2007). This paper seeks to analyze a recent activity in relation to Fielder Contingency Model. Alzheimer disease is a disease that affects the human brain and if not treated at an advanced stage may have lethal consequences. As such, it has been necessary to carry out research on the disease in order to look into the problem and propose solutions that might eliminate it, or provide medicine effective in avowing adverse effects on the victims. Research entails looking into a specified problem and using relevant literature and results obtained, bring out a solution. In this regard, research might include different parties and the success of the entire project is determined by the coordination of each and every party. Therefore, good leadership is essential to ensure smooth undertaking of the research. The research on Alzheimer disease was executed using rats as specimen, as Terrence believed argued , â€Å"We believe the rats will be an excellent, stringent pre-clinical model for testing experimental Alzheimer’s disease therapeutics† (Thomas para 2). From the research, it emerged that high level of beta-amyloid in the brain leads to the occurrences of the health disorder, Alzheimer. The disease affects a substantive percentage of American population, about five million, making it an important aspect of research, which would ensure that citizens live happy lives, free from diseases. The research on Alzheimer disease was carried out by a team of experts headed by Professor Terrence Town. Each person acted at different capacity and the joined effort led to the success realized. In concluding presenting the results, Professor Neil argued that presenting the results to interested researchers with results obtained would be of great help in the future. This is an aspect of good leadership as in recognizes

To what extent is New Media Technology to blame for increase in Assignment

To what extent is New Media Technology to blame for increase in anti-social behaviour within social groups - Assignment Example New media entails digitalization of content that can be produced at once at the set time, as contrasted to traditional printed media (Bers & Bers, 2011). Digital activities can be seen in DVDS, the internet and social media, computer games, amongst others. Basically, what is correlated to the internet, and interplay between technology images and sounds may be termed as new media (Bers & Bers, 2011). In the work of Clarke (2003) and Cardwell & Flanagan (2003) anti-social behavior refers to behaviors that lack thoughtfulness for the other persons and the society at large. At times, the behavior may either be premeditated or unintentional, but as Morrison, (2007) indicates, these behaviors create unsociable individuals. This is to mean that anti-social behaviors are contrary to the norms of the society. They may range from rape to drug addiction. While the new media has been instrumental in making the world a global village, the media has also had its dark side on the society. As seen in the research by Bull (2000) new media has brought a completely new auditory experience to the users. The work clearly explains the experience of a user with the iPod that can select music, which has been termed by Bull (2000) as an urban experience. Through personal stereos, Bull (2000) emphasizes that users can control their aural environments by blocking the ‘undesirable city sounds.’ He gives an example of a passenger travelling, and how musical experience rearranges their experience of time (Bull, 2000). It is evident from this iPod that the individual locks the ‘outside world’ contact to a creation of their own world, be it traffic or a neighbor starting a conversation. Cardwell & Flanagan’s (2003) work indicates that negative influences on the environment like noise may aggravate anti-social behavior. Applying the social learning theory (vicarious reinforcement and observational learning) an individual is likely to imitate what is heard especially if the

Astronomy - Dark Matter Essay Example | Topics and Well Written Essays - 1000 words

Astronomy - Dark Matter - Essay Example 23 percent is dark matter, which we cannot observe and is invisible to us and 73 percent is dark energy which is countering the effects of gravity and hence driving the expansion of the universe. The idea of dark matter came after observing the motion of spiral galaxies like our own Milky Way. Motion of the stars in Andromeda Galaxy, which is our nearest, was observed. In case of spiral galaxy, it was expected that the stars at the outer layer or arms of the galaxy would move faster than the ones on the inside to keep up with the shape of the galaxy. The observations, however, were contradicting this notion and readings showed stars at the outside moving with almost the same speed as the inner stars. Since gravity depends on mass of the object, it was calculated that the visible mass of the galaxy was not enough to keep it together. The anomaly in the motion of spiral galaxy suggested that the mass of the galaxy might be more than it seems. We see circular motion all around us in the universe from the motion of our planets around the sun and in a similar way motion of stars around galactic center. Calculations suggested that the visible mass of the galaxy did not have enough gravitational force to overcome the centrifugal force in spiral galaxies and with the mass of visible matter; the galaxies would lose their spiral shape and break away. Since, this is not the case and we see spiral galaxies all around us; there must be invisible matter that seems to have a gravitational effect but does not interact with visible matter. This invisible matter is called dark matter and it has mass which in turn gives it gravitational force. An explanation for this missing mass was given that red dwarfs or remnants of supernovas which are difficult to observe because they are low light sources, could account for this missing mass; but, the idea was soon ruled out because the missing mass discrepancy could not be justified with even dwarf galaxies. Dark matter may not be visible to us, but, there are strong observations pointing towards its existence. Gravitational lensing is an effect which points towards existence of dark matter. As per Einstein’s theory, light bends with the gravitational effect of massive objects. Dark matter does not interact with light, but, because it has mass, light from distant galaxies bend around areas with dark matter. The area of dark matter in between the telescope and the galaxies, act as a giant lens and distorts the image, magnifies some galaxies and even causes circular lines distortions typical with common lenses (Kleingrothaus and Arnowitt 27). It is further observed that galaxies form within clumps of dark matter. Dark matter is thought to be the skeleton aiding in formation of galaxies. It is still not completely understood how the galaxies form, but when computer simulations are run for creation of galaxies with only the visible matter, the result point towards a failed galaxy that could not hold itself togeth er. However, with the inclusion of dark matter or extra mass, the evolution of galaxies as per the computer simulations line up with the images we observe in the universe (Clavin 2). Visible matter joins in the clumps of dark matter and stars initially form because of increased effect of gravity. Over time galaxies evolve from elliptical to circular disks and eventually in their present form that is spiral galaxies. The mystery of dark matter questions

Answering questions for case study Essay Example | Topics and Well Written Essays - 1000 words

Answering questions for case study - Essay Example Starbucks capabilities are a combination of innovation, ownership, talented employees, merchandising, image building, and retailing. 2. Today, Starbucks have to leverage its resources and capabilities to achieve growths in the retail sales by expanding consumer base and market opportunities. To start with, Starbucks needs to consider its financial standing which currently does not support rapid expansion. Continuing with joint ventures and relying on their network of distribution and marketing would be a wise decision. But since Starbucks core business model is dependent on retail outlets and property ownership then it would be prudent to extend its brands through expansion in the brick-and-mortar environment. Starbucks has the option to develop its growth through increased presence in new markets or transfer its technology through franchising. I would suggest that Starbucks take on franchising partly and continue with expansion on its own. For example one main store in a country with franchises in smaller urban settings. This would ensure that increased baristas without expensive investment in human resources, property, marketing, and logistics without losing the essence of its organizational culture, standards, values and business strategy. Alternatively, if Starbucks continue to expand with its own investment by planting stores in new and emerging markets, in the long term it would have more investment returns and values, but slowdown on achieving strategic objectives. 3. Given the market conditions of the specialty coffee and mushrooming of coffee houses and bars, I would not respond to McDonalds offer. This is because 1) the McDonalds brand is associated with low-price food solutions whereas Starbucks has established itself as high priced specialty coffee distributor and provider of high quality coffee experience; 2) because McDonalds offer means channeling into the basic coffee market whereas Starbucks needs to concentrate on the

Global E-commerce Essay Example | Topics and Well Written Essays - 3000 words

Global E-commerce - Essay Example The smallest unit of Bitcoin is Satoshi wherein 100 million Satoshi are there in 1 Bitcoin. The supply of Bitcoin has the limit of 21 million which is equal to 2100 trillion Satoshi. The current supply is 57% of the total which is equivalent 12 million Bitcoins. The public history with regards to transactions is experiencing upgrades at a continuous rate and also verified by the miners who can gather new transactions in different blocks and attach these blocks at the end of the chain called the block chain. Every single movement of the Satoshi is been tracked right from the first owner to the present owner. This helps in preventing fraud as the customer is aware of the number of Bitcoins he or she wants to spend on a particular transaction. Bitcoin as a medium of exchange is different from the transactions done in other exchanges. Bitcoin gained popularity among the companies that were involved with the facilities of Bitcoin ecosystem. In addition, Bitcoin has provided different soft ware like Bitpay to the merchants and has also absorbed FX volatility risk by giving a guarantee towards a successful transaction undertaken at the right exchange rates and also in making bank payments. From 2013, the company started making significant developments and changes to the start up so as to improve the process and also make it more users friendly for the customers for easy transactions. This report is an exclusive study about the importance of ecommerce and how it helps in creating a good business for the company especially in creating a good brand image. The way ecommerce is done using different platforms and how it benefits both the company and the customers can be seen in a wide and descriptive manner. The importance of ecommerce and the performance of ecommerce for Bitcoin will be analysed in comparison with FOREX.com which is a global leader in foreign exchange and provides contract for different individuals who makes transactions while trading

Astronomy - Dark Matter Essay Example | Topics and Well Written Essays - 1000 words

Astronomy - Dark Matter - Essay Example 23 percent is dark matter, which we cannot observe and is invisible to us and 73 percent is dark energy which is countering the effects of gravity and hence driving the expansion of the universe. The idea of dark matter came after observing the motion of spiral galaxies like our own Milky Way. Motion of the stars in Andromeda Galaxy, which is our nearest, was observed. In case of spiral galaxy, it was expected that the stars at the outer layer or arms of the galaxy would move faster than the ones on the inside to keep up with the shape of the galaxy. The observations, however, were contradicting this notion and readings showed stars at the outside moving with almost the same speed as the inner stars. Since gravity depends on mass of the object, it was calculated that the visible mass of the galaxy was not enough to keep it together. The anomaly in the motion of spiral galaxy suggested that the mass of the galaxy might be more than it seems. We see circular motion all around us in the universe from the motion of our planets around the sun and in a similar way motion of stars around galactic center. Calculations suggested that the visible mass of the galaxy did not have enough gravitational force to overcome the centrifugal force in spiral galaxies and with the mass of visible matter; the galaxies would lose their spiral shape and break away. Since, this is not the case and we see spiral galaxies all around us; there must be invisible matter that seems to have a gravitational effect but does not interact with visible matter. This invisible matter is called dark matter and it has mass which in turn gives it gravitational force. An explanation for this missing mass was given that red dwarfs or remnants of supernovas which are difficult to observe because they are low light sources, could account for this missing mass; but, the idea was soon ruled out because the missing mass discrepancy could not be justified with even dwarf galaxies. Dark matter may not be visible to us, but, there are strong observations pointing towards its existence. Gravitational lensing is an effect which points towards existence of dark matter. As per Einstein’s theory, light bends with the gravitational effect of massive objects. Dark matter does not interact with light, but, because it has mass, light from distant galaxies bend around areas with dark matter. The area of dark matter in between the telescope and the galaxies, act as a giant lens and distorts the image, magnifies some galaxies and even causes circular lines distortions typical with common lenses (Kleingrothaus and Arnowitt 27). It is further observed that galaxies form within clumps of dark matter. Dark matter is thought to be the skeleton aiding in formation of galaxies. It is still not completely understood how the galaxies form, but when computer simulations are run for creation of galaxies with only the visible matter, the result point towards a failed galaxy that could not hold itself togeth er. However, with the inclusion of dark matter or extra mass, the evolution of galaxies as per the computer simulations line up with the images we observe in the universe (Clavin 2). Visible matter joins in the clumps of dark matter and stars initially form because of increased effect of gravity. Over time galaxies evolve from elliptical to circular disks and eventually in their present form that is spiral galaxies. The mystery of dark matter questions

Global E-commerce Essay Example | Topics and Well Written Essays - 3000 words

Global E-commerce - Essay Example The smallest unit of Bitcoin is Satoshi wherein 100 million Satoshi are there in 1 Bitcoin. The supply of Bitcoin has the limit of 21 million which is equal to 2100 trillion Satoshi. The current supply is 57% of the total which is equivalent 12 million Bitcoins. The public history with regards to transactions is experiencing upgrades at a continuous rate and also verified by the miners who can gather new transactions in different blocks and attach these blocks at the end of the chain called the block chain. Every single movement of the Satoshi is been tracked right from the first owner to the present owner. This helps in preventing fraud as the customer is aware of the number of Bitcoins he or she wants to spend on a particular transaction. Bitcoin as a medium of exchange is different from the transactions done in other exchanges. Bitcoin gained popularity among the companies that were involved with the facilities of Bitcoin ecosystem. In addition, Bitcoin has provided different soft ware like Bitpay to the merchants and has also absorbed FX volatility risk by giving a guarantee towards a successful transaction undertaken at the right exchange rates and also in making bank payments. From 2013, the company started making significant developments and changes to the start up so as to improve the process and also make it more users friendly for the customers for easy transactions. This report is an exclusive study about the importance of ecommerce and how it helps in creating a good business for the company especially in creating a good brand image. The way ecommerce is done using different platforms and how it benefits both the company and the customers can be seen in a wide and descriptive manner. The importance of ecommerce and the performance of ecommerce for Bitcoin will be analysed in comparison with FOREX.com which is a global leader in foreign exchange and provides contract for different individuals who makes transactions while trading

A football match review Essay Example for Free

A football match review Essay My piece of coursework is a football match review. The score line is fictional for dramatic effect. Such an article would be traditionally found in the back pages of a tabloid newspaper, such as The Sun or The Daily Mail. The analysis is of a crunch match, which will decide the victor of the Premiership. Therefore, I have given the article an emotive title, with the use of the word epic. This sets the scene for the tension I build up within the article. In terms of the layout, I have attempted to match that of both the Daily Mail and The Sun. I have placed the score line and the author name underneath the title respectively. At the top of the page I have shown the subject, in this case, The Premiership. The Daily Mail uses this technique to head their pages, such as finance and motoring. I initiate the article with an introductory text, which sets the scene for the importance of such a match. This text is in larger font than the rest of the article, which simply shows that the piece is an introduction. Within the text, I have used dividers, commonly used by The Sun newspaper. These are usually one-word headings, which relate to the following paragraph. I have used these mainly to divide the text and provide a lightly informative hint to the contents of the paragraph. The photograph on the right hand side is taken from ITVs website and is accompanied with a caption. All analysiss are accompanied by a photograph taken from the game. The incident in the photograph usually relates to the victor of the match. In this case, a Newcastle player is shielding the ball from a Man Utd player to represent Newcastles winning of the match. Additionally, there are two information boxes included. One shows the score line and scorers and the other provides specific information the game such as number of yellow cards and free kicks. These boxes are only featured within a tabloid newspaper and are taken to the extreme by The Sun, who sometimes give very specific but often unnecessary details on the game. I have only included common information, which adds authenticity and depth to the analysis. The language I have used within this analysis, relates to football language. Such examples are midfield, tactics, centrally attacking, Red Devils and Magpies. Clearly, this terminology is only understandable to those with knowledge of football as the intended audience is of course football supporters. The language I use also dramatises the situation in order to keep the readers interest and to give an exaggerated view of the situation. An example from the text is with Solano hitting the underside of the crossbar after a stunning run. This technique helps to build up the readers view of the atmosphere in the stadium. Progressively, through various drafts of my coursework, I have generally improved the layout of the work, adding columns and paragraph headings to the article. I have also changed some parts of the text due to grammatical errors and improved the overall presentation of the article.

The Fmcg Sector Is Currently Economics Essay

The Fmcg Sector Is Currently Economics Essay India has a huge untapped market in the rural areas as well which accounts for more than 700 Million consumers i.e. 40 of the total FMCG market. This market provides a huge opportunity for the FMCG sector because of its large market space and low levels of organized player penetration. 7) The FMCG sector has a strong future and will continue to see growth because it depends heavily on an ever-increasing internal market for consumption, and demand for these goods is more or less inelastic irrespective of recession or inflation. Thus, this sector will grow, though it may not be a smooth growth path, due to the present world-wide economic slowdown, rising inflation and fall of the rupee. However, this sector will see strong growth in the long run. 8) Unlike the developed countries where the FMCG sector is dominated by only a few players Indias FMCG sector is highly fragmented with both Organized and unorganized players playing an important role. The governments proposal of allowing 51% FDI in multi brand retail may impact the future of the retail sector to some extent though the impact is expected to be highly positive. Threat of new entrants: Moderate -Low regulatory barriers -Intense competition requires heavy investments in brand building which discourages small players Threat of substitutes: High -Multiple brands positioned with narrow product differentiation -Companies trying to gain market share compete on pricing which increases product substitution Rivalry among competitors: High -Entry of MNCs into the country -Use of extremely aggressive marketing strategies Bargaining power of consumers: Low -High brand loyalty for some products, discourages product shifting -Low switching costs -Aggressive marketing induce customers to switch between products MICHAEL PORTERS 5 FORCE MODEL Bargaining power of supplier: Moderate -Prices are governed by International commodity markets, making FMCG cos price takers -Due to the long term relationships with suppliers etc., FMCG companies negotiate better rates during times of high input cost inflation The above graph is based on the analysis of the sales and profitability of approximately 100 listed FMCG companies across foreign MNCs and large and small Indian players. As can be seen from the graph the average CAGR of the FMCG sector rose from 8% (2001-05) to 17% (2006-10). There has been a drastic increase in the CAGR in the case of foreign MNCs which shows the variety of choices available to the consumers Economy Impact: Favorable economic factors like GDP growth coupled with a rise in incomes, increased participation of women in the workforce and the tapping of rural markets have led to a spurt in the growth rate of the FMCG sector in the past decade. The Indian economy is expected to overtake UK in the coming decade, with GDP growth ranging between 8-10 per cent. India is expected to reach Chinas current population figure of 1.4 billion by 2020. Per capita incomes supported by various government schemes and policies are expected to rise in both rural and urban areas (The UPA govt cash transfer scheme for the poor people, expectations of economic recovery bring with it the hope of increased salaries and more employment opportunities all of which will lead to increase in the per capita income of the country that will have a direct impact on the FMCG sector) Participation of women in the Indian workforce is also likely to rise. Estimates suggest that if it increases to approximately 70 percent (as in the developed nations), it will further boost GDP growth by 2-3 per cent. Favorable government policies such as the introduction of GST can be expected to substantially decrease supply chain costs. FDI in multi-brand retail up to 51% will open up a large channel for sales. Other policy measures such as lower income taxes, the Food Security Act, Right to Education, infrastructure schemes etc have also acted as enablers of higher consumption. Evolving Consumer Profile: India has a comparatively younger population compared to most other countries of the world, who have greater willingness to spend on better quality products which is expected to boost the consumption-driven economy. Young population (below age of 30 years) comprise 59 per cent population currently, and the composition is likely to remain similar over the next decade. Rural markets, given the current low penetration and high untapped potential are expected to bring about super-normal growth for FMCG companies. All these factors will combine to catapult consumer demand for FMCGs to newer heights. Interest rates and inflation and its impact on the FMCG sector: Given the current economic scenario and the average inflation rates at 9.09% in India (2012) it has a taken a toll on the FMCG sector. High prices have led to reduced consumption of FMCG goods leading to fall in demand which has led to lower sales for the companies and affected their profit margins. Also, as a result of inflation prices of raw materials have shot up leading to a spurt in the cost of production for companies which has again had a negative impact on the profit margins. The central banks decision of cut in interest rates has made it easier for the companies to borrow money in the capital markets to further their plans of expansion and diversification but it has not led to any major increase in consumer spending. Major players in the FMCG industry: 1) Foreign Players: Hindustan Unilever Ltd., ITC, Nestle, Reckitt Benckiser, Cadbury, Procter Gamble, Godfrey, Phillips, Henkel, Spic, Johnson Johnson, Revlon, PepsiCo 2) Indian Players: Marico, Dabur, Godrej, Wipro, Amul, Nirma, Britannia 3) Regional or small domestic players: Ajanta, Anchor, CavinKare etc SWOT Analysis of the FMCG sector: STRENGHTS: 1) Favourable government policies in terms of reduced level of taxes, fewer import restrictions on raw materials and technology and reduced barriers of entry of foreign players 2) Low operational costs as labour costs in India are very less 3) Existing and well established brands in the FMCG sector 4)Good supply chain and distribution networks in both urban and rural markets 5) FDI of 51% in multi brand retail will redefine the entire retail sector with new entrants, improvements in supply chain and distribution networks 6) Demand for FMCG products is mostly inelastic WEAKNESS: 1) Counterfeit products: This is a major problem that is hampering the growth of the FMCG industry. Counterfeit products account for an estimated 10-15% of the total size of the FMCG industry which resulted in a loss of INR 45 billion to the exchequer. 2) The scope of investing in technology is less and it is difficult for companies to achieve economies of scale particularly the small sector ones. OPPORTUNITY: 1) The rural Indian market presents a huge opportunity for the FMCG sector as still most of it is untapped and yet to be explored 2) Slow and steady rise in per capita income of the Indian population would lead to increase in demand for FMCG products 3) Burgeoning middle class with a lot of potential to spend large amounts of their income on FMCG products 4) India has a huge domestic market with close to 1 billion population 5) Tremendous export potential THREAT: 1) Increasing rate of inflation which is likely to raise the cost of raw materials thereby increasing cost of production and putting stress on overall industry profits 2) Rise in fuel prices may further lead to increase in distribution costs 3) Declining value of the rupee against other currencies of the world may further reduce margins as cost of importing raw materials will rise 4) Dipping industrial growth and slowing global economy may lead to fall in demand for FMCG products Future of the FMCG sector in India (2020) As per recent estimates the FMCG industry may grow at a base rate of at least 12 per cent annually to become INR 4000 billion industry in 2020. However, if the economic conditions turn out to be favourable and everything goes as expected the sector may even record a 17 per cent growth over the next decade, leading to an overall industry size of INR 6200 billion by 2020. This however depends solely on the future economic scenario. Modern trade is expected to grow very rapidly in the future with its share in total retail projected to reach 11 per cent by 2014 and 30 per cent by 2020 This growth will be supported by: -High economic growth: GDP is expected to grow at 8-10 per cent in the future, boosting growth in all sectors. Increasing incomes: Incomes are expected to continue to rise which should further drive spending. Increasing urbanization: Organized retail will continue to increase presence in Tier 1 and Tier 2 cities, which are growing faster than metros. -Improving infrastructure: The government is also focusing a lot on infrastructure development which is expected to improve the supply chain and distribution networks. Key to EDUCORPORATEBRIDGE investment rankings: BUY = Expected to outperform the local market by >10%; O-PF = Expected to outperform the local market by 0-10%; U-PF = Expected to underperform the local market by 0-10%; SELL = Expected to underperform the local market by >10%. Performance is defined as 12-month total return (including dividends). Â ©2011 EDUCORPORATEBRIDGE, India. Note: In the interests of timeliness, this document has not been edited. Other disclosures will come xXXXXXXXXXXXXXXXXXXXXXXXXX

Bless Me, Ultima Essay -- essays research papers

Antonio is Alienated   Ã‚  Ã‚  Ã‚  Ã‚  I believe that in the novel Bless Me, Ultima Antonio is an alienated individual. He doesn’t seem to act like any of the other kids his age and has been through so much more then they have. For example, Antonio is torn between making his mother happy and becoming a priest, or making his father happy and becoming a cowboy type figure. He also has experienced a lot of death in his life to people he cared deeply about. I believe that Antonio is alienated because he has the mind of an adult, he is the only one who can talk to Ultima, and he can see the future. Oddly, Antonio is the only one who understands Ultima. For example, in the beginning of the book Antonio shook Ultima’s hand and he could sense the power of a whirlwind pass through hi...

Telecommunication Essay -- Technology Computer Networks Essays

Telecommunication 1. Introduction   Ã‚  Ã‚  Ã‚  Ã‚  Computer and telephone networks inflict a gigantic impact on today's society. From letting you call John in Calgary to letting you make a withdraw at your friendly ATM machine they control the flow of information. But today's complicated and expensive networks did not start out big and complicated but rather as a wire and two terminals back in 1844. From these simple networks to the communication giants of today we will look at the evolution of the network and the basis on which it functions. 2. The Beginnings 2.1. Dot Dot Dot Dash Dash Dash Dot Dot Dot   Ã‚  Ã‚  Ã‚  Ã‚  The network is defined as a system of lines or structures that cross. In telecommunications this is a connection of peripherals together so that they can exchange information. The first such exchange of information was on May 24, 1844 when Samuel Morse sent the famous message "What hath God wrought" from the US Capitol in Washington D.C. across a 37 mile wire to Baltimore using the telegraph. The telegraph is basically an electromagnet connected to a battery via a switch. When the switch is down the current flows from the battery through the key, down the wire, and into the sounder at the other end of the line. By itself the telegraph could express only two states, on or off. This limitation was eliminated by the fact that it was the duration of the connection that determined the dot and dash from each other being short and long respectively. From these combinations of dots and dashes the Morse code was formed. The code included all the letters of the English alphabet, all the numbers and several punctuation marks. A variation to the telegraph was a receiving module that Morse had invented. The module consisted of a mechanically operated pencil and a roll of paper. When a message was received the pencil would draw the corresponding dashes and dots on the paper to be deciphered later. Many inventors including Alexander Bell and Thomas Edison sought to revolutionize the telegraph. Edison devised a deciphering machine. This machine when receiving Morse code would print letters corresponding to the Morse code on a roll of paper hence eliminating the need for decoding the code. 2.2. Mr. Watson, Come Here!   Ã‚  Ã‚  Ã‚  Ã‚  The first successful telephone was invented by Alexander Graham Bell. He along with Elisha Gray fought against t... ... they use different addressing protocols, only routers may be used. During these times MANs (Metropolitan Area Networks) are in use and development today. These use routers that are connected preferably via a fiber optic cable, to create one large network. 5.2. Pluto Calling Earth!   Ã‚  Ã‚  Ã‚  Ã‚  Any networks larger than 1000m typically rely on telephone digital lines for data transfer. These networks are called Circuit Switched Digital Networks . Circuit Switched Digital Networks utilize a switching matrix at the central office of a telephone company that connects local calls to long distance services. The Telephone companies now offer dial up circuits with signaling rates of 56, 64, and 384 kilobits per second as well as 1.544 megabits per second. Another type of LAN to LAN connections are packet switching networks. These are services that a network router calls up on a digital line. They consist of a group of packet switches that are connected via intraswitch trunks (usually fiber optic) that relay addressed packets of information between them. Once the packet reaches the destination packet switch, it sends it via another digital connection to the receiving router. Telecommunication Essay -- Technology Computer Networks Essays Telecommunication 1. Introduction   Ã‚  Ã‚  Ã‚  Ã‚  Computer and telephone networks inflict a gigantic impact on today's society. From letting you call John in Calgary to letting you make a withdraw at your friendly ATM machine they control the flow of information. But today's complicated and expensive networks did not start out big and complicated but rather as a wire and two terminals back in 1844. From these simple networks to the communication giants of today we will look at the evolution of the network and the basis on which it functions. 2. The Beginnings 2.1. Dot Dot Dot Dash Dash Dash Dot Dot Dot   Ã‚  Ã‚  Ã‚  Ã‚  The network is defined as a system of lines or structures that cross. In telecommunications this is a connection of peripherals together so that they can exchange information. The first such exchange of information was on May 24, 1844 when Samuel Morse sent the famous message "What hath God wrought" from the US Capitol in Washington D.C. across a 37 mile wire to Baltimore using the telegraph. The telegraph is basically an electromagnet connected to a battery via a switch. When the switch is down the current flows from the battery through the key, down the wire, and into the sounder at the other end of the line. By itself the telegraph could express only two states, on or off. This limitation was eliminated by the fact that it was the duration of the connection that determined the dot and dash from each other being short and long respectively. From these combinations of dots and dashes the Morse code was formed. The code included all the letters of the English alphabet, all the numbers and several punctuation marks. A variation to the telegraph was a receiving module that Morse had invented. The module consisted of a mechanically operated pencil and a roll of paper. When a message was received the pencil would draw the corresponding dashes and dots on the paper to be deciphered later. Many inventors including Alexander Bell and Thomas Edison sought to revolutionize the telegraph. Edison devised a deciphering machine. This machine when receiving Morse code would print letters corresponding to the Morse code on a roll of paper hence eliminating the need for decoding the code. 2.2. Mr. Watson, Come Here!   Ã‚  Ã‚  Ã‚  Ã‚  The first successful telephone was invented by Alexander Graham Bell. He along with Elisha Gray fought against t... ... they use different addressing protocols, only routers may be used. During these times MANs (Metropolitan Area Networks) are in use and development today. These use routers that are connected preferably via a fiber optic cable, to create one large network. 5.2. Pluto Calling Earth!   Ã‚  Ã‚  Ã‚  Ã‚  Any networks larger than 1000m typically rely on telephone digital lines for data transfer. These networks are called Circuit Switched Digital Networks . Circuit Switched Digital Networks utilize a switching matrix at the central office of a telephone company that connects local calls to long distance services. The Telephone companies now offer dial up circuits with signaling rates of 56, 64, and 384 kilobits per second as well as 1.544 megabits per second. Another type of LAN to LAN connections are packet switching networks. These are services that a network router calls up on a digital line. They consist of a group of packet switches that are connected via intraswitch trunks (usually fiber optic) that relay addressed packets of information between them. Once the packet reaches the destination packet switch, it sends it via another digital connection to the receiving router.

Methods in Identifying Business Process Essay

Abstract This paper will discuss which information gathering methods can be used in analyzing requirements, identify which business process mapping methods should be used in analysis activities, discuss which business process mapping tools should be used in documenting analysis, indicate how the analyst would know if these methods and tools were effective in understanding the requirements, and explain how prototyping tools could be used to confirm these requirements. Assessment of Enterprise Level Business Systems Information gathering used in analyzing the requirements of a business are essential to ensure that the customer is getting the best possible product for their needs. It is important for the consulting team to know different methods of information gathering to obtain the best possible information they can as this will help to ensure a higher success rate for the overall implementation of the product. In today’s world, it is very easy for a customer to comparison shop the different products available to them. Browsing online and clicking a mouse is all it takes to move from one company to the next. The process starts when a customer starts narrowing down what they are looking for and begins to choose a few systems to have personally demonstrated to the company. Best practices would state that the consultant in charge of providing the demonstration of the software would do some homework on the company to find out what they do, start speaking with some of the stake holders to see what they expect from a new system (HR may not have the same requirements as IT, who may not have the same requirements as management or production). Meeting with a number of stakeholders within the different departments of a business will help the consultant narrow down the needs of the organization. This gives the consultant an edge and can help the consultant provide a customized demonstration of the software for the company. Digging deeper, the consultant should also have a team of experts on his or her side as well, someone that may be a subject matter expert, and a technical expert  will help as well. This is to ensure that input is taken from users and from IT and can be used to ensure the best possible user interface for those using the system and what resources are already in place vs. what is needed on the technical side. Every avenue available to the consultant should be examined to ensure the best system fit for the business. The business process mapping methods that should be used in analysis activities should be determined by what the business is doing. There are four main steps of process mapping that are needed. They are: * Process identification or attaining a comprehensive and well-rounded understanding of all the steps of a process. * Information gathering, or identifying objectives, risks and key controls in a process. * Interviewing and mapping or gaining the perspective of individuals in the process and designing actual maps to be used in the process. * Analysis or utilizing the tools and approaches used to make the process run in the most efficient and effective way possible. (Jacka, J. Mike) First, the process or processes used by the business must be identified so the consultant may gain a full understanding of what is to be expected in the new system. Without process identification, the project would be at a standstill. Gathering information around the processes helps identify what the objectives of a process might be, what risks might be involved within a process and what is needed to control the process from beginning to end. For example, if a company that makes fiberglass bathtubs were to put a process in place for the gel coating or painting procedure of a tub project, the process might show that the mold is to be positioned in the paint booth, dust and debris is to be removed from the mold using a wipe down cloth and air hose, the paint has to be a certain thickness, so one of the risks involved would be paint that is too thick or thin in spots. Finally we have the controls that maintain the process from beginning to end which may be manual or robotic. Other things could also come into play such as paint levels, catalyst and dry time, so it is important to obtain all information surrounding the process as possible. Interviewing individuals who currently run a process is important to ensuring that nothing is left out of the process. If it is possible, the consultant should interview a few different  people that perform the same function to obtain an objective look at the overall process and cover different ways of doing the same thing. From these interviews the process map could be created. Finally, we would analyze the process map and ensure that each step of the process is accounted for and is conducted in the efficient and effective way. The consultant may ask additional questions at this point to see if something within the current process is wasteful, and what may be done to improve on the process. Documenting the process of the analysis should be done meticulously as well. This can be done in a report fashion or in a flow chart fashion. Both have their merits, however, a flow chart can make a very complicated process seem very simple by breaking it down into steps and utilizing different shapes for these steps. A flowchart is a primary type of business process mapping the shapes or symbols used such as arrows, circles, diamonds, boxes, ovals or rectangles will mean something different for each step. Though a flowchart simplifies a process, it can detail the inputs, activities, decision points, and outputs of any process. An analyst could know that this type of documentation and mapping has shown its worth by the understanding and acceptance of those he has interviewed to understand the process in the first place. If the analyst allows the users to review the flowcharts and they understand each step of the process, then the documentation has done what was intended. Additionally, the users may be able to point out additional ways to make a process better at that time if they had not done so before. Prototyping tools allow the analyst to create a mockup of what the documented process may look like and how it may actually work in simulated real time. The prototype can show users what a version of the finished product may look like and how it will function. This is yet another failsafe built into the overall assessment process and may give the analyst another area to make process improvements based on the input of users, management and project stakeholders. The assessment of an enterprise level business system is lengthy and can be complicated if the right people are not included in the process. However, if the analyst follows time proven techniques to identify what is needed, gather information, document and map out the processes and use the analysis of the mapped out processes to create a good prototype, the analyst should be better able to create what is needed for the business. References Jacka, J. Mike & Paulette J. Keller (2011), Business Process Mapping: Improving Customer Satisfaction, Second Edition(6-10)

Learnings in Operations Management from Henry Ford, Sloan and Toyota Essay

The success of Henry Ford till 1925s Henry Ford did not invent the automobile. He didn’t even invent the assembly line. But more than any other single individual, he was responsible for transforming the automobile from an invention of unknown utility into an innovation that profoundly shaped the 20th century and continues to affect our lives today. Model T (A car for everyman) In simple terms, the Model T changed the world. It was a powerful car with a possible speed of 45 mph. It could run 25 miles on a gallon of gasoline. It carried a 20-horsepower, side-valve four-cylinder engine and two-speed planetary transmission on a 100-inch wheelbase. It was Henry Ford’s foresight which saw the potential market of automobiles. In his opinion transportation was a basic need of human and if affordable anyone would be willing to buy it. It was with this vision of delivering automobiles to everyman that Ford started to experiment with different production methodologies to lower the cost of production. Influence of Frederick Taylor on Henry Ford Frederick Taylor was a contemporary of Henry Ford. His theory of scientific management had a big impact on Henry Ford. According to Henry Ford, the assembly line was based on three simple principles: â€Å"the planned, orderly, and continuous progression of the commodity through the shop; the delivery of work instead of leaving it to the workman’s initiative to find it; an analysis of operations into their constituent parts.† A scientific approach to these principles, the next logical step in the organization of work, had already been enunciated by Frederick Taylor in what is now called as scientific management. Henry Ford used the techniques specified by Frederick Taylor in increasing the efficiency of his process. Taylor’s scientific management consisted of four principles: 1. Replace rule-of-thumb work methods with methods based on a scientific study of the tasks. 2. Scientifically select, train, and develop each employee rather than passively leaving them to train themselves. 3. Provide â€Å"Detailed instruction and supervision of each worker in the performance of that worker’s discrete task†. 4. Divide work nearly equally between managers and workers, so that the managers apply scientific management principles to planning the work and the workers actually perform the tasks. Learnings from Henry Ford and Model T Assembly Line/Mass production In 1913 Henry Ford started production of Ford Model T in a sliding assembly line. Though assembly line was used previously used in different industry but it was mostly for products which had small number of parts. Model T on the other hand had many more components. Sliding assembly line of Henry Ford was inspired by overhead trolleys used to dress up beef. Henry Ford thought that the same technique can be used for automobile too. A breakthrough came in April 1913. A production engineer in the flywheel magneto assembly area tried a new way to put this component’s parts together. The operation was divided into 29 separate steps. Workers placed only one part in the assembly before pushing the flywheel down the line to the next employee. Previously, it had taken one employee about 20 minutes to assemble a flywheel magneto. Divided among 29 men, the job took 13 minutes. It was eventually trimmed to five minutes. This approach was applied gradually to the construction of the engine and other parts. According to Henry Ford: The principles of assembly are these: (1) Place the tools and the men in the sequence of the operation so that each component part shall travel the least possible distance while in the process of finishing. (2) Use work slides or some other form of carrier so that when a workman completes his operation, he drops the part always in the same place—which place must always be the most convenient place to his hand—and if possible  have gravity carry the part to the next workman for his own. (3) Use sliding assembling lines by which the parts to be assembled are delivered at convenient distances. Advantages of assembly Line : In his autobiography Henry Ford (1922) mentions several benefits of the assembly line including: Workers do no heavy lifting. No stooping or bending over. No special training required. There are jobs that almost anyone can do. Provided employment to immigrants. The gains in productivity allowed Ford to increase worker pay from $1.50 per day to $5.00 per day once employees reached three years of service on the assembly line. Ford continued on to reduce the hourly work week while continuously lowering the Model T price. Interchangeable/Standard Parts Centre to the concept of assembly line was the concept of interchangeable parts. Interchangeable parts meant that all the cars had same components at same place. This saved time which could have been wasted in sorting and identification of different parts. Henry Ford made sure that all components were standardised in the production of Model T. But it was not only parts which were standardised, Henry Ford also standardised all the processes. Following Frederick Taylor’s â€Å"One right way  to do the task†, Henry Ford devised the best possible way for a process. These were usually devised by detailed study of every task, time measurements and dividing tasks into small, controllable and reproducible steps. Labour policies Ford astonished the world in 1914 by offering a $5 per day wage ($120 today), which more than doubled the rate of most of his workers. The move proved extremely profitable; instead of constant turnover of employees, the best mechanics in Detroit flocked to Ford, bringing their human capital and expertise, raising productivity, and lowering training costs. Ford announced his $5-per-day program on January 5, 1914, raising the minimum daily pay from $2.34 to $5 for qualifying workers. It also set a new, reduced workweek. Ford’s policy proved, however, that paying people more would enable Ford workers to afford the cars they were producing and be good for the economy. Ford explained the policy as profit-sharing rather than wages. Franchising Ford pioneered the franchise system that would be applied to other industries, such as MacDonald’s and many other franchise giants. He put a Ford plant in every country that was on good terms with the U.S. and started the trend toward global corporations. Ford mapped out the whole system, from standardizing the car to franchising dealerships to creating a global network, and he did it all with no precedents to learn from. Just in Time (Henry Ford’s Contribution) Ernest Kanzler worked with Henry Ford in reducing the inventory costs at Fordson tractor plant. Kanzler noticed that during the Great War, excessive supplies were brought into the Fordson Tractor Plant prior to production. He found that these excess supplies tied up valuable plant space and millions of dollars. To remedy this, Kanzler reorganized inventory schedules so that raw materials and pans were bought only when needed and that the freight cars used for  delivery of these pans were used immediately to transport finished Fordson tractors to dealers. The success of General Motors post  1927 (Sloan) Mr. Sloan was elected President of General Motors in 1923, succeeding Pierre S. du Pont, who said of him on that occasion: â€Å"The greater part of the successful development of the Corporation’s operations and the building of a strong manufacturing and sales organization is due to Mr. Sloan. His election to the presidency is a natural and well-merited recognition of his untiring and able efforts and successful achievement.† Mr. Sloan had developed by then his system of disciplined, professional management that provided for decentralized operations with coordinated centralized policy control. Applying it to General Motors, he set the corporation on its course of industrial leadership. The next 23 years, with Mr. Sloan as Chief Executive Officer, were years of enormous expansion for General Motors and of a steady increase in its share of the automobile market. Changing with times While Henry Ford’s success with Model T was based on providing a mean of transport to everyone, Sloan realized that by 1925s just getting a mean of transport was not important. People were now more conscious about the looks and features of car too. He changed the organisation and production system at General Motors to keep up with these changes and provide an advantage over Ford who were still producing only one model at a time. Learnings from Alfred Sloan and General Motors Annual Model Change/Planned obsolescence To maintain unit sales, General Motors head Alfred P. Sloan Jr. suggested annual model-year design changes to convince car owners that they needed to buy a new replacement each year, an idea borrowed from the bicycle industry. In his autobiography, â€Å"My Years with General Motors,† he penned this thought  Ã¢â‚¬Å"The changes in the new model should be so novel and attractive as to create demand . . . and a certain amount of dissatisfaction with past models as compared with the new one.† Decentralisation in Organisational structure Alfred Sloan split General Motors into divisions, and each division was run as a company within a company. Sloan said the company was  Ã¢â‚¬Å"coordinated in policy and decentralised in administration†. He supervised the decentralisation of the organisation into divisional operating units, placing in charge of each an executive with total authority for his own activity. In order to give coherence to the decentralised organisation, Sloan deliberately maintained a degree of central control. Decentralisation he saw as analogous to free enterprise, and centralisation to regimentation. He believed that elements of both were necessary to successful business. At the same time as dividing the company into separate units, he developed a system which enabled the units to support each other, therefore establishing a much stronger organisation as a whole. Price Segmentation Sloan realized that he can’t compete with Ford in price wars. Instead what he did was to have a model in every price segment. This way they can take some chunk of Ford’s low price range with Chevrolet cars while giving multiple options to users at higher ends. His theory was to provide â€Å"A car for every purse and purpose†. This proved very successful in the long run and have become a must do thing for big businesses in all kind of industries. Financing A company was founded in 1919 by General Motors Corporation as the General Motors Acceptance Corporation (GMAC) to be a provider of financing to automotive customers. This proved very beneficial in the long run as Ford had no such system and it negated the effect of low prices provided by Ford to some extent. Inventory  control and production control Sloan devised a system where inputs from retailers and individual organisation was used to decide the production plans for future. He asked every office to give three estimates- pessimistic, realistic and optimistic. These reviews were used to forecast and plan the future production. Also, it was used to decide how much inventory needed to be kept. Fact Based planning and Decision Planning Sloan always put an emphasis on fact based decision making. Even when working under his predecessors Durant and du Pont, he always went to them with changes in system based on data. Something which du Pont readily accepted and was important in selection of Sloan as next President of General Motors. The success of Toyota in the 70s and 80s The history of Toyota started in 1933 with the company being a division of Toyoda Automatic Loom Works devoted to the production of  automobiles under the direction of the founder’s son, Kiichiro Toyoda. Kiichiro Toyoda had travelled to Europe and the United States in 1929 to investigate automobile production and had begun researching gasoline-powered engines in 1930. Toyoda Automatic Loom Works was encouraged to develop automobile production by the Japanese  government, which needed domestic vehicle production, due to the war with China. Need for innovation After WWII, Levels of demand in the Post War economy of Japan were low and the focus of mass production on lowest cost per item via economies of scale therefore had little application. Kiichiro Toyoda again visited many automobile companies in US and Europe. He found that production strategies haven’t changed much in last 20 years. He asked Taiichi Ohno to devise a system as cost efficient as Ford for the Japanese economy. Taiichi Ohno took his own tour of different facilities in US. Having visited and seen supermarkets in the USA, Taiichi Ohno recognised the scheduling of work should not be driven by sales or production targets but by actual sales. Given the financial situation during this period, over-production had to be  avoided and thus the notion of Pull (build to order rather than target driven Push) came to underpin production scheduling. The working of Toyota production system has been very well documented in Jeffrey Liker’s book â€Å"The Toyota Way†. Some tools from Toyota production System Jidoka It may be described as â€Å"intelligent automation† or â€Å"automation with a human touch.† This type of automation implements some supervisory functions rather than production functions. At Toyota this usually means that if an abnormal situation arises the machine stops and the worker will stop the production line. It is a quality control process that applies the following four principles: 1. Detect the abnormality. 2. Stop. 3. Fix or correct the immediate condition. 4. Investigate the root cause and install a countermeasure. Kanban (Just In Time) Kanban cards are a key component of kanban and signal the need to move materials within a manufacturing or production facility or move materials from an outside supplier in to the production facility. The kanban card is, in effect, a message that signals that there is a depletion of product, parts, or inventory that, when received, the kanban will trigger the replenishment of that product, part, or inventory. Consumption therefore drives demand for more production, and demand for more product is signaled by the kanban card. Kanban cards therefore help create a demand-driven system. Kaizen Kaizen is a daily process, the purpose of which goes beyond simple productivity improvement. It is also a process that, when done correctly, humanizes the workplace, eliminates overly hard work (â€Å"muri†), and teaches  people how to perform experiments on their work using the scientific method and how to learn to spot and eliminate waste in business processes. In all, the process suggests a humanized approach to workers and to increasing productivity: â€Å"The idea is to nurture the company’s human resources as much as it is to praise and encourage participation in kaizen activities.† Successful implementation requires â€Å"the participation of workers in the improvement.† People at all levels of an organization participate in kaizen, from the CEO down to janitorial staff, as well as external stakeholders when applicable. The format for kaizen can be individual, suggestion system, small group, or large group. 5 Whys The 5 Whys is an iterative question-asking technique used to explore the cause-and-effect relationships underlying a particular problem.The primary goal of the technique is to determine the root cause of a defect or problem. (The â€Å"5† in the name derives from an empirical observation on the number of iterations typically required to resolve the problem.) 5S There are five primary 5S phases: They can be translated from the Japanese as Sort, Systematize, Shine, Standardize and Self-Discipline. Sort: Remove unnecessary items and dispose of them properly Systematize: Arrange all necessary items in order so they can be easily picked for use Shine: Prevent machinery and equipment deterioration Standardize: Maintain everything in order and according to its standard Self-Discipline: To keep in working order Ohno Circle Taiichi Ohno was well known for walking onto the shop floor and drawing a circle on the ground. He would then go and stand in the circle and observe, think and analyse. Learn what was actually going on. From this study he would then have enough knowledge to improve the process. Three types of waste Muda: any activity in your process that does not add value. MUDA is not creating value for the customer. Mura: Any variation leading to unbalanced situations. In short: UNEVENNESS, inconsistent, irregular. Muri: Any activity asking unreasonable stress or effort from personnel, material or equipment. In short: OVERBURDEN Andon Andon is a manufacturing term referring to a system to notify management, maintenance, and other workers of a quality or process problem. The alert can be activated manually by a worker using a pullcord or button, or may be activated automatically by the production equipment itself. The system may include a means to stop production so the issue can be corrected. Learning from Toyota Production System The Toyota Way A brief summary of points given in Toyota Way: Section I: Long-Term Philosophy Principle 1. Base your management decisions on a long-term philosophy, even at the expense of short-term financial goals. Section II: The Right Process Will Produce the Right Results Principle 2. Create a continuous process flow to bring problems to the surface. Principle 3. Use â€Å"pull† systems to avoid overproduction. Principle 4. Level out the workload (heijunka). (Work like the tortoise, not the hare.) Principle 5. Build a culture of stopping to fix problems, to get quality right the first time. Principle 6. Standardized tasks and processes are the foundation for continuous improvement and employee empowerment. Principle 7. Use visual control so no problems are hidden. Principle 8. Use only reliable, thoroughly tested technology that serves your people and processes. Section III: Add Value to the Organization by Developing Your People Principle 9. Grow leaders who thoroughly understand the work, live the philosophy, and teach it to others. Principle 10. Develop exceptional people and teams who follow your company’s philosophy. Principle 11. Respect your extended network of partners and suppliers by challenging them and helping them improve. Section IV: Continuously Solving Root Problems Drives Organizational Learning Principle 12. Go and see for yourself to thoroughly understand the situation (genchi genbutsu). Principle 13. Make decisions slowly by consensus, thoroughly considering all options; implement decisions rapidly (nemawashi). Principle 14. Become a learning organization through relentless reflection (hansei) and continuous improvement (kaizen). References http://corporate.ford.com/our-company/heritage/heritage-newsdetail/672-model-t http://en.wikipedia.org/wiki/Assembly_line http://www.sloan.org/about-the-foundation/who-was-alfred-psloan-jr/ http://corporate.ford.com/our-company/heritage/historic-sitesnews-detail/663-highland-park http://www.thehenryford.org/EXHIBITS/HF/ http://www.investopedia.com/articles/financial-theory/08/henryford.asp http://www.vectorstudy.com/management-gurus/frederick-taylor http://www.shmula.com/fords-contribution-to-just-in-time/371/ http://www.willamette.edu/~fthompso/MgmtCon/Scientific_Manage ment.html http://en.wikipedia.org/wiki/Planned_obsolescence http://inspiredeconomist.com/2012/09/20/the-greatest-inventionplanned-obsolescence/ http://www.mbsportal.bl.uk/taster/subjareas/busmanhist/mgmtthin kers/sloan.aspx http://www.economist.com/node/14298890 http://faculty.chicagobooth.edu/anil.kashyap/research/papers/gene ralmotors.pdf http://en.wikipedia.org/wiki/Henry_Ford http://en.wikipedia.org/wiki/Alfred_P._Sloan The Toyota Way – Jeffrey Liker My Years with General Motors – Alfred Sloan